How to take a screenshot in GIMP and prepare it for sharing
Choose the capture route your system supports, annotate on separate layers and check the exported screenshot before sharing.

To take a screenshot in GIMP, choose File → Create → Screenshot, select an available capture mode and click Snap. If you need a region that the dialog can't capture, use your system's screenshot tool, then open the saved file in GIMP or choose File → Create → From Clipboard. I'd use the system tool for a quick region capture and GIMP for the editable labels, careful crop and checked PNG that follow.
Choose the capture route for your system
GIMP can capture a screen as well as edit one. Its Screenshot command uses system functions, so a tutorial's dialog may look different from yours. A missing option doesn't mean the installation is broken.
| Your system or task | Practical starting point |
|---|---|
| Windows, selected region | Use Windows + Shift + S, then import the snip. GIMP's Windows dialog has window and screen capture, without Select a region to grab. |
| macOS, region or one window | Use Shift + Command + 4; press Space afterwards for a window. Open the saved image in GIMP. |
| Linux desktop | Try File → Create → Screenshot. A desktop capture dialog may handle the selection through the XDG portal; follow the options it actually offers. |
| A menu that disappears | Use a screenshot timer, start capture, then reopen the menu during the delay. Entire-screen capture avoids accidentally selecting only the main window. |
| A page longer than the screen | Capture the page with a tool that supports that task, then open the file. Ordinary screen capture doesn't scroll the page for you. |
Close notifications and move account details out of view before either route. A smaller capture saves editing later, but keep the dialog title and the setting's surrounding controls when they explain the problem.
Capture directly into GIMP
- Arrange the window you want to show, with the relevant control visible.
- Choose File → Create → Screenshot. If a system capture prompt opens, make the selection there instead of looking for GIMP's controls behind it.
- In GIMP's own dialog, choose Take a screenshot of a single window or Take a screenshot of the entire screen. Use Select a region to grab only where that option exists.
- Set the available pointer and window-decoration options for the capture. Window decorations include the title bar and frame; don't remove useful context just to make a tighter picture.
- Click Snap and complete any window or region selection. The capture opens as a new image.

Windows has no Select a region to grab or Selection delay in this dialog. The current platform notes for Screenshot document both differences. For a rectangle, use Snipping Tool or capture the screen and crop afterwards; reinstalling GIMP won't add the missing mode.
Catch an open menu or tooltip
Choose entire-screen capture and set a non-zero Screenshot delay. Start the capture, switch to the target window and open the menu before the timer finishes. A value such as five seconds is a starting choice, not a required setting. Keep the pointer clear of any text it would cover.
If the desktop prompt doesn't expose a suitable timer, use the system capture app. Windows Snipping Tool has a Delay option for capturing menus; macOS Screenshot opens with Shift + Command + 5 and offers a timer under Options. Choose the timer before opening the menu, rather than hoping it stays open while you change apps.
Bring in a Windows, Mac or Linux capture
Windows
Press Windows + Shift + S and select the snipping mode you need. Open the result in Snipping Tool, then use Ctrl + C to copy the snip. In GIMP, choose File → Create → From Clipboard. Microsoft's Snipping Tool instructions also cover saving an additional file copy: save as PNG, then use File → Open in GIMP if clipboard transfer fails.
I prefer that explicit copy step to relying on what Print Screen happened to do. Windows versions and keyboard settings can route that key differently; the useful check is whether the captured image is on the clipboard.
macOS
Press Shift + Command + 4, drag over the required area and release. For a window, press those keys, then press Space and click the window. Use Shift + Command + 3 for the whole screen. Open the saved capture with File → Open in GIMP; the default save location is the desktop unless you've changed it in Screenshot's Options.
To use the clipboard, hold Control as well as the capture keys, then choose File → Create → From Clipboard in GIMP. Apple's Mac screenshot instructions explain both the file and clipboard routes. On supported Macs offering HDR capture, choose SDR (Most Compatible) for a routine PNG support image; HDR capture uses HEIF and introduces a different colour and file-format workflow.
Linux
Use your desktop's screenshot control, then open the saved file or import its image from the clipboard. On GNOME, Print opens a capture overlay with area, window and screen choices. Its screenshot help describes saving to Pictures/Screenshots and copying the image to the clipboard. Other desktops have their own controls and locations, so don't apply GNOME's shortcuts to every Linux setup.
For any system, From Clipboard makes a new image sized to the copied image. Ordinary Paste into an existing project adds content to that project's canvas instead. If the clipboard command is unavailable, copy the image from the capture tool again, rather than copying a filename, file icon or web address. A saved PNG is the straightforward fallback.
Crop and add editable callouts
Save a private working copy with File → Save As and an .xcf filename. XCF keeps the layers and text available for revision; it doesn't preserve the Undo history between sessions. Keep an untouched copy of the original capture too if later crops may need a wider view.
Use GIMP's Crop tool to retain the part that explains the issue. Check that you're cropping the image rather than only one selected layer. Then keep callouts above the capture, so moving a label doesn't damage a setting or erase useful pixels.
- Choose Layer → New Layer, name it Callouts, leave the image-sized dimensions and set Fill With to Transparency. Keep it above the capture.
- Select that new layer's image thumbnail. Choose a clear foreground colour in the Toolbox and use Rectangle Select to surround the relevant control.
- Choose Edit → Stroke Selection. Use the Line option with Foreground color and set Line width in pixels; adjust the width to suit the screenshot's actual size. The Stroke Selection command draws the selection boundary onto the selected layer.
- Choose Select → None after stroking. The marching-ants selection border itself isn't an exported annotation.
- Use Tools → Text to add a short label beside the control. A new text box creates its own editable text layer. Keep the label clear of the value you're explaining.
For a simple support image, a box and a short label usually communicate enough. I'd keep those editable rather than install an arrow plug-in for a single callout. Inspect at 100% zoom and at the size the recipient will see: a crisp export can still be too small to read when displayed.
If the box or solid fill does not appear
Select the Callouts or Redactions layer's image thumbnail, rather than a mask, and check that the layer is above the capture, visible and fully opaque. In the layer's lock controls, turn off Lock pixels and Lock alpha channel for this new drawing layer. The Layers dialog controls matter here: alpha lock prevents changes to transparent areas, so an empty transparent layer can stay empty when you try to draw on it.
Stroke Selection is available only with an active selection. If it is greyed out, draw the rectangle again. If a fill lands in the wrong small area, choose Select → None and make a fresh rectangle over the intended region. Keep that rectangle active until the stroke or fill is applied; with no selection, Fill with FG Color fills the whole selected layer.
Cover private details before exporting
Keep the layered XCF private. A covering layer can be hidden or removed in that file, exposing the original capture underneath. Cropping can also leave out-of-canvas layer content in the project. Send a checked export instead of the working file.
For sensitive text, I use an opaque cover with a margin around the characters. A highlight is meant to show information through it, and light blur can leave the original characters recognisable.
- Create a new transparent layer called Redactions at the top of the layer list, outside any masked group. Set its mode to Normal and opacity to 100%, with no layer mask.
- Choose Rectangle Select. Turn off Feather edges and Antialiasing, then select a rectangle that extends beyond every character of the private value.
- Set an opaque foreground colour and choose Edit → Fill with FG Color. This fills the selected area with that solid colour. Use Fill, rather than Stroke, which would leave the centre readable.
- Choose Select → None. Check every covered area and the image edges for names, addresses, tokens, notifications and window titles.
A redaction needs fully covered pixels in the exported image. A lowered layer opacity, a feathered edge crossing letters or a mask that hides part of the cover changes that result. Leave the redaction layer visible when exporting and inspect the resulting file, not just the XCF's layer list.
Export a readable PNG and reopen it
Choose File → Export As, enter a new filename ending in .png and click Export. PNG is my default for interface text and flat-colour controls because its compression is lossless. Raising PNG's compression level changes compression effort and file size, not image quality; it isn't a JPEG quality slider.
For a private capture, inspect the PNG metadata options. Turn off Save Exif data, Save IPTC data, Save XMP data, Save thumbnail and Save comment unless that information is intentionally required. Disable thumbnail saving separately: it can save some EXIF tags even when Save Exif data is off. A colour profile serves a different purpose, so keep it when needed for correct colour interpretation.
Open the exported PNG through File → Open as a separate image. Confirm the correct crop, readable text, visible callouts and completely covered private areas. Check its filename and attach that exact file to the message. Exporting doesn't update or flatten the XCF working project, so save the XCF separately if you need to keep your edits.
If the delivery file needs smaller pixel dimensions, use Image → Scale Image on a delivery copy and recheck the labels. Changing print resolution alone doesn't reduce the pixels. I'd crop unnecessary desktop space before shrinking small interface text; enlarging a low-resolution capture can't recover detail that wasn't captured.
Fix a blank capture, missing content or colour shift
The capture is blank or access is refused
First save a capture using the system tool and open that file in GIMP. If it looks correct, continue with that route and isolate the direct-capture problem separately. On macOS, check the permission for the app doing the capture under System Settings → Privacy & Security → Screen & System Audio Recording; Apple's screen-recording access controls explain the setting. Older macOS versions can label it Screen Recording. On Linux, complete the desktop's capture prompt. Neither route requires disabling desktop security.
Some apps restrict screenshots of their windows, including protected playback surfaces. A black video rectangle isn't fixed by changing the annotation layer or repeatedly converting colour profiles. Capture the error message or settings that can legitimately be shown, rather than trying to bypass the restriction.
The capture includes the wrong window or misses a menu
Use entire-screen capture with a timer, reopen the menu during the delay and crop afterwards. A single-window capture and a desktop capture can include different surrounding elements. If the direct dialog has no suitable region or timer option, return to the system app instead of changing unrelated GIMP preferences.
The screenshot looks different after import or export
Keep the original capture for comparison. GIMP's Screenshot dialog can tag the monitor profile or convert to sRGB, and the current manual flags a possible incorrect-profile assignment. Check the image's profile through Image → Color Management before assigning another one. Repeatedly assigning or converting profiles without knowing the source can make the diagnosis harder.
For an ordinary support image, return to an SDR capture if HDR was involved, retain an appropriate profile and compare the reopened export with the source. The file you send should explain the setting clearly, with the private material already removed from its visible pixels.



